Stm32f103rct6 Mcu Microcontroller Unit Arm Microcontroller Ic 32bit

Stm32f103rct6 Mcu Microcontroller Unit Arm Microcontroller Ic 32bit Mcu Chip Lqfp-64

Description                                                                                                           

STM32F103RCT6,LQFP64, High-density performance line Arm®-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16- bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.

The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.

Features                                                                                                               

• Core: Arm® 32-bit Cortex®-M3 CPU

– 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state

   memory access

– Single-cycle multiplication and hardware division

• Memories – 256 to 512 Kbytes of Flash memory

– up to 64 Kbytes of SRAM

– Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM,

   NOR and NAND memories

– LCD parallel interface, 8080/6800 modes

• Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage detector (PVD)

– 4-to-16 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC with calibration

– 32 kHz oscillator for RTC with calibration

• Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers • 3 × 12-bit, 1 µs A/D converters (up to 21 channels)

– Conversion range: 0 to 3.6 V

– Triple-sample and hold capability

– Temperature sensor

• 2 × 12-bit D/A converters

• DMA: 12-channel DMA controller

– Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs • Debug mode

– Serial wire debug (SWD) & JTAG interfaces

– Cortex®-M3 Embedded Trace Macrocell™

• Up to 112 fast I/O ports

– 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

Applications                                                                                                        

The STM32 F1 series basic MCU meets various application needs in the industrial, medical, and consumer markets. With this product series, Yifa Semiconductor holds a leading position in the global ARM Cortex-M microcontroller field and sets a milestone in embedded applications. This series utilizes excellent peripherals and low-power, low-voltage operations to achieve high performance, while also achieving high integration at an acceptable price, utilizing a simple architecture, and easy-to-use tools.

Date Sheet                                                                                                          

Transportations & Payments                                                                             

Frequently Asked Questions                                                                               

Shipping:

1, We can shipping all over the world by DHL, UPS, FEdex, TNT and EMS.The packaging is very

safe and strong. Please nitfy me you have any special needs
2, It will take around 3-5 days to reach your hands.

Product Type & condition:

Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot

be, promptly updated.So please consult the stock situation when you inquire.

Buyer Reading:

1. Please confirm receipt of products if the items you received,and if the goods was damaged please

contact us immediately. send the photo to us that we can check and give you best solution

2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related

sales person will be responsible to send the AWB for the delivered goods in the next workday.

you can check the AWB in the website which we send to you. For the AWByou also can call to the

local branch of the express company in your company.

Pre-sales service :

1. Our team design and make solutions based on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours

on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within 12 hours